Wireless; Wireless Settings - TP-Link TL-WR810N User Manual

Subnet Mask - An address code that determines the size of the network. Normally

255.255.255.0 is used as the subnet mask.
Gateway - The gateway should be in the same subnet as your IP address.

 Allow remote access - Allow remote devices to access the AP device by inputting the IP
address in browser.

Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically， while the Virtual Server and
DMZ Host will not take effect until they are re-configured.
3. When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled.

7.5 Wireless

Figure 7-5 Wireless menu
There are six submenus under the Wireless menu: Wireless Settings, Wireless Security,
Wireless MAC Filtering, Wireless Advanced, Wireless Statistics and Throughput Monitor.
Click any of them, and you will be able to configure the corresponding function.

7.5.1 Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
TL-WR810N 300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
- 163 -