Toro LT3340 Operator's Manual page 2

This product complies with all relevant European directives.
For details, please see the separate product specific
Declaration of Conformity (DOC) sheet.
Introduction
This machine is a ride-on, cutterhead-blade lawn mower
intended to be used by professional, hired operators in
commercial applications. It is primarily designed for cutting
grass on parks, sports fields, caravan parks, cemeteries, and
commercial grounds. It is not designed for cutting brush or
for agricultural use.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro for product safety and operation
training materials, accessory information, help finding a
dealer, or to register your product directly at www.Toro.com or
Toro Commercial Products Service Department, Spellbrook,
Bishops Stortford, CM23 4BU, England, +44(0)1279 603019,
Email: uk.service@toro.com.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. The model and serial numbers are on a
plate mounted on the left side of the frame under the foot
rest. Write the numbers in the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
(Figure
Figure 1
1),
2
Contact us at www.Toro.com.
Printed in the UK
All Rights Reserved