T" Arm Width Adjustment; T" Arm Pad Depth Adjustment - Invacare Comet Owner's Operating And Maintenance Manual

ARMS
Height
Adjustment
Holes
HEIGHT
A
ADJUSTMENT
R
Allen
M
Screw
S
Towards Front
of Wheelchair
HEIGHT
ADJUSTMENT
Arm Socket
Mounting Bolts
FIGURE 6 - "T" ARM
INSTALLATION/HEIGHT ADJUSTMENT
"T" ARM WIDTH ADJUSTMENT (FIGURE 7)
1. Remove the two (2) phillips screws that secure
the arm pad to the arm tube.
2. Turn the arm pad around and reposition the arm
pad on the arm tube.
3. Resecure the arm pad to the arm tube with the
two (2) phillips screws.
4. Repeat for the opposite side, if necessary.
Arm Pad
Phillips
Screw
FIGURE 7 - "T" ARM WIDTH ADJUSTMENT
Arm Post
Skirt Guard
Clamp
Wide End of
Skirt Guard
(Towards Rear
of Wheelchair)
Locknuts
Coved
Washers
Coved
Wheelchair
Washers
Frame
WIDTH
ADJUSTMENT
Arm Tube
Phillips
Screw

"T" ARM PAD DEPTH ADJUSTMENT

(FIGURE 8)
1. Remove the two (2) phillips screws that secure
the arm pad to the arm tube.
2. Remove the two (2) allen screws that secure
the arm tube to the armrest assembly.
3. Reposition the arm tube to one (1) of four (4)
positions depending on the desired arm pad
depth.
NOTE: Two (2) of the four positions are obtain-
able by rotating the arm tube 180
4. Resecure the arm tube to the armrest assem-
bly with the two (2) allen screws.
5. Reattach the arm pad to the arm tube with the
two (2) phillips screws.
6. Repeat for the opposite side, if necessary.
Allen
Screws
Phillips
Screw
Armrest
Assembly
FIGURE 8 - "T" ARM PAD DEPTH ADJUSTMENT
25
PROCEDURE 2
o
.
Arm Pad
Arm Tube
NOTE: If
necessary,
rotate arm
o
tube 180 to
obtain two (2)
positions.
Phillips
Screw
A
R
M
S