Procedure 4 - Adjustments; Headwing Adjustment; Headrest Adjustment; Arm Adjustment - Invacare 3000 Owner's Operator And Maintenance Manual

PROCEDURE 4
This Procedure includes the following:

Headwing Adjustment

Headrest Adjustment

A

Arm Adjustment

D

Seat Depth Adjustment

J
Legrest Adjustment
U
S
Swingaway Footrest
T
Wheel Lock Adjustment
M
Tray Adjustment and Storage
E
N
HEADWING ADJUSTMENT (FIGURE 1)
T
All HTR headwings are width adjustable. To adjust, loosen
S
the tension knob on the back of the chair, slide the
headwing to the desired position and securely tighten
the tension knob. All HTR headwings can also be re-
versed to change their height. To do this, take the left
headwing and install it on the right side, and vice-versa.
Be careful not to damage the headwings when
flipping the back down.
FIGURE 1 - HEADWING ADJUSTMENT
CAUTION
HEADREST ADJUSTMENT
The headrest can be moved vertically to meet varying
needs. Simply pull the headrest up or down to achieve
the desired position. The fastening straps can be loos-
ened or tightened accordingly.
ARM ADJUSTMENT (FIGURE 2)
All HTR arms are adjustable height flip back arms. Height
adjustment is achieved by pulling back the release pin
(located at front beneath the armpad) and lifting up the
upper arm section to its desired height. Release the pin
to lock it in place. To flip back the arm, pull the front arm
release pin back.
WARNING
Ensure the armrest is locked in position before
moving the HTR.
FIGURE 2 - ARM ADJUSTMENT
SEAT DEPTH ADJUSTMENT
Seat depth can be adjusted in a range from 15"-19" in 1"
increments. To adjust the depth, pull the lever under the
left side of the seat, slide the seat to the desired location
and release, making sure the pin has locked into the hole.
12
ADJUSTMENTS