Solving Print Quality Problems - Ricoh infoprint 1222 Service Manual

Infoprint 1222

Solving Print Quality Problems

Note: To run the print quality test pages:
•
Turn the printer off and open the door.
•
Turn the printer on while pressing Continue.
•
Continue to press and hold Continue until lights finish
cycling.
•
When the Error light stays on, close the door and wait until
the four top lights are on.
•
Press Cancel until the top two lights are on.
•
Press Continue for three seconds. The print quality test
pages print. See
page 2-59
Problem
Light or blurred characters.
2-52
Service Manual
"Using Print Quality Test Pages" on
for more information.
Action
The print cartridge may be getting
low on toner:
• Remove the print cartridge.
• Shake it from side to side to
• Reinstall it.
• Make sure you are using
• Use MarkVision™ to define the
• The print cartridge may be
redistribute the toner.
recommended print media (see
media types and sizes in the
User's Guide.)
custom type setting for media
type, media texture, or media
weight.
defective. Replace it.