Restoring Factory Defaults; Using Print Quality Test Pages - Ricoh infoprint 1222 Service Manual

Infoprint 1222

Restoring Factory Defaults

Sometimes resetting the printer to the original factory default
settings solves formatting problems.
1. Enter the configuration mode. See
Group or Diagnostic Menu Group" on page 3-2
information.
2. Press and release Cancel.
The Ready/Data light is on.
3. Press Continue until lights flash.
The factory defaults are reset.
4. To return the printer online, POR the printer.

Using Print Quality Test Pages

To help isolate print quality problems, like streaking, print test pages
using the print quality test pages setting:
1. Enter the special function menu. See
Group or Diagnostic Menu Group" on page 3-2
information.
2. Press Cancel and wait for the Ready/Data light.
3. Press Cancel again and wait for the Toner Low light.
4. Press Cancel again and wait for both Ready/Data and Toner
Low lights.
5. Press and hold Continue until lights cycle.
Three pages print to help you evaluate print quality. The first
page has registration marks, the second page is gray, and the
third page is black. Once the paper exits into the output bin, the
printer returns to the Ready state.
6. Use the test pages to isolate problems such as print too light,
toner streaks, and so on. See the Troubleshooting tables in the
User's Guide for solutions to these problems.
7. To return the printer online, POR the printer.
"Configuration Menu
"Configuration Menu
Diagnostic Information
for more
for more
2-59