Mercedes-Benz S 450 4MATIC Operator's Manual page 302

Entering the PIN or unlock code
Enter the PIN or unlock code using the
telephone keypad, Voice Control or
telephone*.
The telephone will then search for a
network.
You may carry out the following functions:
Function
Dialing a number from the phone
book
Redialing
Answering a call
Ending a call or rejecting an in-
coming call
Dialing a number from the mobile
phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
Log on to the network ( page 300).
i
When you insert a Mercedes-Benz approved
mobile phone into the cradle*, the control sys-
Page
tem reads in the phone book that is saved on the
SIM card or in the phone book of the mobile
301
phone. This can take several minutes, depending
on how many entries each phone book contains.
When you press %, $, (, & or
302
# during the download of the phone book the
302
message "Reading telephone data, please
wait..." appears in the multifunction display.
302
When the message: "Reading telephone data,
please wait..." disappears, the phone book has
been loaded.
Control systems
Instrument cluster control system
Press % or $ or # to switch
to the phone book.
Press % or $ to select the de-
sired name.
The stored names are displayed in as-
cending alphabetical order.
i
If you do not want to dial from the phone
book, press t or L. In the multifunction
display appears again "Ready" or "Ready (Roam-
ing)".
i
If you press and hold % or $ for
more than 1 second, the system scrolls
rapidly through the list of names.
If you press and hold % or $ for more than
4 seconds, the control system shows the first
four entries of the letter next used. Release the
button to stop the quick search. The search
stops automatically at the end of the list.
301