Mercedes-Benz S 450 4MATIC Operator's Manual page 178

If "Navigate" is selected, a message ap-
pears indicating that the address is incom-
plete.
Closing message: Select "OK".
Depending on which data is missing or
cannot be found on the digital map, you
must now either:
select a state (province)
select a county
or enter a city
or enter a street
or enter a house number
Selecting a state (province):
Select desired state (province) from
the list.
Selecting a county: Select desired
county from the list.
Entering a city: Proceed as described
for destination entry in the "Entering a
city" section ( page 208).
Entering a street: Proceed as de-
scribed for destination entry in the "En-
tering a street" section ( page 211).
Entering a house number: Proceed
as described for destination entry in
the "Entering a house number" section
( page 216).
i
If you have added data, COMAND saves your
additions. This means that you do not need to
re-enter this additional data later on.
The COMAND memory saves the additional data
in a special field, which cannot be displayed. The
data, which you have entered in the address
book initially in the display, remains unchanged.
If all data is available and matches the dig-
ital map data, the navigation system starts
the route calculation.
Control systems
COMAND telephone*
Voice entries
i
For voice entries, your vehicle must be
equipped with Voice Control. You can not add
voice entries to address book entries that have
been read-in from the phone book of the mobile
phone.
Adding or changing a voice entry
i
You can add one voice entry per address
book entry.
Search for the address book entry with
or without a voice entry ( page 170).
Select "Options" "Voice Name"
"Add" or "Change".
Subsequent operation is controlled by
voice. Voice Control guides you
through the dialogs.
177