Mercedes-Benz S 450 4MATIC Operator's Manual page 200

Adjusting: Select "Navi" "Navi"
"Map Display".
The map display list appears. A dot R
indicates the current setting.
Select "Standard symbols", "Personal
symbols" or "No symbols".
If you select "Personal symbols", the
list of POIs appears.
Switching POI symbol display on
or off: Select the desired POI.
The corresponding symbol displays
are switched on or off, depending
on the previous status. A check-
mark indicates which status is ac-
tive. You can switch on the symbol
displays for more than one POI.
i
The list shows all symbols that are contained
in the digital map across all states (USA) and/or
provinces (CDN). Not all POIs in all states (USA)
or in all provinces (CDN) are available, however.
Certain POI symbols may not be displayed on the
map, even if the symbol display is switched on.
omp
Exiting menu: Slide or press
back button L in the center console
( page 88).
Arrival time and distance
You can set whether the estimated arrival
time and the distance to the destination
should be displayed in the map.
Displaying: Select "Navi" "Navi"
"Map Display".
The map display list appears. A dot R
indicates the current setting.
Select "Arrival Time/Distance".
Depending on the previous status the
display showing the arrival time and
distance is switched on or off.
Control systems
COMAND navigation (introduction)
Current street
You can set whether the current street you
are driving on should be displayed in the
map.
Displaying: Select "Navi"
"Map Display".
The map display list appears. A dot R
indicates the current setting.
Select "Current Street".
Depending on the previous status the
display showing the current street is
switched on or off.
"Navi"
199