Mercedes-Benz S 450 4MATIC Operator's Manual page 542

Example illustration
1 Insert the mobile phone
2 Connector contact
3 Mobile phone cradle
Slide the lower end of the mobile phone
into connector contact 2 on
cradle 3.
Push the top of the mobile phone in di-
rection of arrow 1, until the lug on the
mobile phone release button engages.
The mobile phone is connected to the
network via the external antenna.
The mobile phone is linked to the
hands-free device and the multifunc-
tion steering wheel.
The battery is charged depending on its
charge status and the position of the
SmartKey in the starter switch. The
charge procedure will be indicated in
the mobile phone's display.
You can place or receive phone calls. You
can control other functions of the mobile
phone via the COMAND ( page 141),
instrument cluster control system
( page 299) or Voice Control
( page 313).
i
When you take the SmartKey or SmartKey
with KEYLESS-GO* out of the starter switch, the
mobile phone remains switched on for approxi-
mately 10 minutes. If you place or receive a call
during this time, the mobile phone switches off
10 minutes after the call has been completed.
Controls in detail
Useful features
Removing mobile phone from mobile
phone cradle
Example illustration
1 Release catch for mobile phone
2 Mobile phone cradle
i
When using a flip-style mobile phone, open
flip top before removing from the cradle while a
call is connected. Otherwise, the call will be dis-
connected.
Press release catch in direction of
arrow 1 and take mobile phone out of
mobile phone cradle 2.
541