Mercedes-Benz S 450 4MATIC Operator's Manual page 164

1 Data field
2 Input mark (cursor)
3 Input characters
qmr
Changing data field: Slide
peatedly until desired data field is high-
lighted.
or
Select [ or ] repeatedly until de-
sired data field is highlighted.
Entering data into a field: Select all
characters one by one from the input
characters line 3.
Toggling upper and lower case for
the input characters: Select & or
(.
Changing language for the input
characters: Select !.
Select desired language.
Changing character set for the input
characters: Select #.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
re-
Displaying special characters as in-
put characters: Select !
bols".
Returning input characters to nor-
mal characters: Select !
desired language.
Moving cursor in the data field:
Select Y or Z.
Control systems
COMAND telephone*
Deleting individual characters:
Select ) and briefly press n.
The character to the left of the cursor is
deleted.
Deleting an entire entry: Select )
and press and hold n until the entry is
deleted.
Saving an entry: Select ?.
Canceling an entry: Select "Back".
If one of the data fields contains data, a
prompt will appear asking whether you
want to save the entry.
Select "Yes" or "No".
"Sym-
The entry will either be saved or
not, depending on your selection.
the
163