4.11 Configuration Copying Commands; Copy Wls8600 Series - Wasp WLS8600 Reference Manual

4.11 CONFIGURATION COPYING COMMANDS

4.11.1

Copy WLS8600 Series

Procedure:
Connect the master (correctly configured reader) and the slave (reader to be

configured) together through two RS-232 serial interface cables and external
power supply.
RS-232 Cables: CAB471 & CAB472
Power Supply: PG5
Using the slave reader, read the Restore Default barcode and then the RS-232

interface barcode from chapter 3 of this manual or from the Quick Reference
Guide.
With the master reader, read the Configuration Copy barcode below.

The configuration will be copied from the master to the slave reader. The slave
reader signals the end of the procedure with a series of beeps.
NOTE: The master reader can be configured for any interface.
Copy Configuration
Ì$+ZZ0$-*Î
MESSAGE FORMATTING
115