Table of Contents
Advertisement
WLS8600
5.2
STATUS INDICATORS
The scanner has two indicator LEDs and a Beeper. They signal several operating
conditions, which are described in the tables below.
H = high tone
WLS8600 READER START-UP
¹
Beeper
L L L L
H H H H
long tones
H L H L
WLS8600 READER CONFIGURATION
¹
Beeper
H H H H
L
L L L
WLS8600 READER DATA ENTRY
¹
LED
Beeper
one beep²
H long
H H H
H H long
OFF
¹ Only the Beeper Intensity command can modify these signals.
² The data entry good read tone is user-configurable with all the Beeper commands
in the Reading Parameters section.
118
Meaning
Parameters loaded correctly
Parameter loading error, reading or writing error in the non volatile
memory
Hardware error in EEPROM
Meaning
Correct entry or exit from Configuration mode
Good read of a command
Command read error
Good Read Spot Meaning
ON
ON
ON
ON
OFF
L = low tone
Correct read of a code in normal mode
Successful advanced format
concatenation
Timeout expired – operation not
completed
Error in advanced data formatting
Ready to read a code
Advertisement
Table of Contents
