Step 2: Make The Network Settings On The Printer - Roland VersaCamm VP-540i Setup Manual

8. Network Settings

Step 2: Make the Network Settings on the Printer

Important
The addresses used in this section are merely example settings. For detailed information about the set-
tings, consult your network administrator.
1.
IPSet the IP address.







Repeat
When you've finished making the setting, press

2.
Set the subnet mask.




42
Press
Press
Press
Press
Press
[IP ADDRESS]: 192.168.000.XXX
Note: Here, "XXX" may be any number you want from 2 to 254. However, be sure to specify
a number that does not duplicate the setting you made in Step 1. Here, "192.168.000.003"
is entered by way of example. Make the portion that corresponds to "192.168.000" the
same as the setting on the computer.
Use
Press

and to set all the address numbers.
Press
The screen shown in the figure appears again.
Press
Press
Use
[SUBNET MASK]: 255.255.255.000
Note: For the subnet mask, make the setting the same value as the one used by the
computer. Here, "255.255.255.000" is entered by way of example.
Press
.
several times.
.
.
three times.
to select the address number.
.
.
.
.
twice.
to select the address number.
.