Step 2: Make The Network Settings On The Printer - Roland SOLJET PRO III XJ-640 Setup Manual

Step 2: Make the Network Settings on the Printer

Important
The addresses used in this section are merely example settings. For detailed information about the set-
tings, consult your network administrator.
1.
Set the IP address.
u
MENU
SYSTEM INFO.
v
SYSTEM INFO.
NETWORK
w
IP ADDRESS
000 . 000 . 000 . 000
x
IP ADDRESS
192 . 000 . 000 . 000
y
IP ADDRESS
192 . 000 . 000 . 000
z
IP ADDRESS
192 . 168 . 000 . 003
{
NETWORK
IP ADDRESS
2.
Set the subnet mask.
u
NETWORK
SUBNET MASK
v
SUBNET MASK
000 . 000 . 000 . 000
w
SUBNET MASK
255 . 000 . 000 . 000
x
SUBNET MASK
255 . 000 . 000 . 000
Press .
Press several times.
Press .
Press .
Press three times.
[IP ADDRESS] : 192.168.000.XXX
Note: Here, "XXX" may be any number you want from 2 to 254. However, be sure
to specify a number that does not duplicate the setting you made in Step 1. Here,
"192.168.000.003" is entered by way of example. Make the portion that corresponds
to "192.168.000" the same as the setting on the computer.
Use to select the address number.
Press .
x y
Repeat and to set all the address numbers.
When you've finished making the setting, press
Press .
The screen shown in the figure appears.
Press .
Press twice.
Use to select the address number.
[Subnet mask] : 255.255.255.000
Note: For the subnet mask, make the setting the same value as the one used by the
computer. Here, "255.255.255.000" is entered by way of example.
Press .
6. Network Settings
.
41