Step 2: Make The Network Settings On The Printer - Roland VersaUV LEF2-200 Setup Manual

Step 2: Make the Network Settings on the Printer

IM P O R TAN T
The addresses used in this section are merely example settings. For detailed information about
the settings, consult your network administrator.
1.
Set the IP address.
Press [MENU].
A
Press [ ] several times to display the screen shown below.
B
MENU
SYSTEM INFO.
Press [ ], then [ ] to display the screen shown below.
C
SYSTEM INFO.
NETWORK
Press [ ] three times to display the screen shown below.
D
IP ADDRESS
192.000.000.000
Press [ ] or [ ] to select the address number.
E
Press [ ].
F
E
Repeat steps
G
Here, "XXX" can be any number from 001 to 254. However, be sure to specify a number that is
different from the numbers used for other computers and devices.
For the part corresponding to "192.168.000," apply the same value as the setting of your computer.
Here, "192,168,000,003" is entered by way of example.
IP ADDRESS
192.168.000.003
When you have finished making the setting, press [ENTER].
H
Press [ ].
I
The screen shown below appears again.
NETWORK
IP ADDRESS
F
and to set the [IP ADDRESS] (192.168.000.XXX).
Connecting to the Computer
2.Installation
39