Step.2:.Make.the.network.settings.on.the.printer; Step 2: Make The Network Settings On The Printer - Roland TrueVIS VG2-640 Setup Manual

Select [Use the following IP address]. Enter the information as shown below, and then
E
click [OK].
Item
IP address
Subnet mask
Here, "XXX" can be any number from 1 to 254. However, be sure to specify a number that is
different from the numbers used for other computers and devices.
Close this window to return to the original state.
F
Windows 10, 8.1
Click [OK] in the [Internet Protocol Version 4 (TCP/IPv4) Properties] dialog box, click
[Close] in the [Ethernet Properties] dialog box, and then click [Close] in the [Ethernet
Status] dialog box.
Windows 7
Click [OK] in the [Internet Protocol Version 4 (TCP/IPv4) Properties] dialog box, click
[Close] in the [Local Area Connection Properties] dialog box, and then click [Close] in
the [Local Area Connection Status] dialog box.

Step 2: Make the Network Settings on the Printer

1.
Set the IP address.
Press [MENU].
A
Press [ ] several times to display the screen shown below.
B
MENU
SYSTEM INFO.
Address to enter
192.168.0.XXX
255.255.255.0
3. Network Settings
57
2.Installation