Table of Contents
Advertisement
Secure the print heads in place using the retainer.
For information on how to secure in place, go to "3. Assembling and Installing" and refer to "Remove the Packing
Materials."
Lower the roll media from the printer and detach the shafts.
If necessary, also detach the left and right arms and the stand.
The machine is now ready to be moved.
Switch off the main power switch.
3.
Immediately move the machine and fill it with ink.
Once the preparations are complete, move the machine with as little delay as possible.
Immediately reinstall the machine and fill with ink.
To reinstall and fill with ink, carry out "3. Assembling and Installing" through "
ink, you use the cleaning cartridges again.
WARNING
Never place discharged fluid near open flame.
Doing so may cause fire.
CAUTION
To store discharged fluid temporarily, place it in the included drain bottle or in
a durable sealed container such as a metal can or polyethylene tank, and cap
tightly.
Any spillage or vapor leakage make cause fire, odor, or physical distress.
Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.
Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate discharged fluid
or discard it with ordinary trash. Also, do not dispose of it in sewer systems, rivers, or streams. Doing so
may have an adverse impact on the environment.
10. When Moving the Unit
8
. Network Setting." When filling with
47
Hide quick links:
Advertisement
Table of Contents
