Roland VersaCamm VP-540i Setup Manual page 33

5. AQUEOUS PIGMENT ink (FPG2): Installing the Ink Cartridges

Hold down
When a message appears on the display screen, release the operation-panel buttons.

2.
Switch on the sub power again, and make the initial settings.




32
and , switch on the main power switch.
Press simultaneously.
Hold down until the
message appears.
When this screen appears, press
The sub power is switched off and the display screen goes blank.
This completes selection of the ink mode that enables use of AQUEOUS PIGMENT ink.
(FPG2)
Use
Press .
Use
(for length).
Press .
Use
(for temperature).
Press .
.
Hold down and press the sub power
switch.
to select the language you want.
to select the unit of measurement you want
to select the unit of measurement you want