When Moving The Unit; Procedures From Preparing To Move Through Reinstalling - Roland VersaCamm VP-540i Setup Manual

For eco-sol max & aquenous pigment ink models
Hide thumbs Also See for VersaCamm VP-540i:
Table of Contents

Advertisement

10. When Moving the Unit

Procedures from Preparing to Move Through Reinstalling

To move the machine, you must completely drain all ink inside the machine and secure the print heads in place with pack-
ing materials to protect them. Attempting to move the machine without first doing this may result in damage to internal
components due to leaking ink or damage to the heads.
This operation requires four unused SOL INK cleaning cartridges. Have these on hand before you start.
What to Have on Hand
Special cleaning cartridges compatible with the ink type are required. Have the required number of each on hand.
ECO-SOL MAX ink:
AQUEOUS PIGMENT ink (FPG2):
Important Notes on Moving
Be sure to employ the correct cleaning cartridges for the ink type. Using cleaning cartridges that are
not compatible with the ink type may result in breakdown.
If the case of ECO-SOL MAX ink, once the preparations for moving are complete, move the machine
and fill it with ink with as little delay as possible. Allowing the machine to stand without ink may dam-
age the heads.
When moving the machine, keep it at a temperature between 5 to 40˚C (41 to 104˚F) and at relative
humidity between 20 to 80% (with no condensation). Failure to do so may result in breakdown.
Handle the machine with care when moving, keeping it level (not tilted at an angle) and preventing it
from striking other objects.
1.
Drain the ink and wash the interior.
Attach the drain bottle and press
Thereafter, follow the on-screen instructions to carry out the operations.
After cleaning has finished, the sub power switches off automatically.
Four SOL INK cleaning cartridges
Four exclusive cleaning cartridges (CJ-CL)
Press
.
Press
several times.
Press
.
Press
twice.
Press
.
Press
twice.
Press
.
ECO-SOL MAX ink models: Ready four SOL INK cleaning car-
tridges.
AQUEOUS PIGMENT ink models: Ready four exclusive cleaning
cartridges (CJ-CL).
Press
.
Discard the discharged ink in the drain bottle.
After cleaning has been performed, the drain bottle is nearly full.
Be sure to discard the discharged ink.
.
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versacamm vp-300i

Table of Contents