Technical Specifications - Alto zmx244fx Quick Start Manual

TECHNICAL SPECIFICATIONS

MONO INPUT CHANNELS:
Microphone inputs (electronically balanced, discrete input configuration)
Frequency response:
THD+N:
Gain range:
SNR:
Line inputs (electronically balanced)
Frequency response:
THD+N:
Gain range:
STEREO INPUT CHANNELS:
Line inputs (balanced/unbalanced)
Frequency response:
THD+N:
IMPEDANCES:
Microphone inputs:
Channel insert return:
All other inputs:
2-Track outputs:
All other outputs:
EQUALIZATION:
High-shelving:
Mid bell (mono):
Hi-Mid (stereo):
Mid-low (stereo):
Low-shelving:
Low-cut filter:
DSP SECTION:
A/D & D/A converters:
DSP Resolution:
Effects:
Presets:
Controls:
MAIN MIX:
Noise (bus noise):
Max output:
Aux returns gain range:
Aux sends, max out:
POWER SUPPLY:
Main voltage: USA/Canada: 100-120 VAC ~ 60 Hz
Power consumption:
Fuse:
Main connection:
DIMENSIONS (W x D x H):
WEIGHT:
* Specifications are subject to change without notice.
20 Hz – 20 kHz, ±1 dB
0.03% at 0 dBu, 1 kHz
0 dB to 50 dB (MIC)
114 dB
20 Hz – 20 kHz, ±1 dB
0.03% at 0 dBu, 1 kHz
-15 to 35 dB
20 Hz – 20 kHz, ±1 dB
0.03% at 0 dBu, 1 kHz
1.4 kΩ
2.5 kΩ
> 10 kΩ
1 kΩ
120 Ω
±15 dB @ 12 kHz
±12 dB (frequency range 100 Hz ~ 8 kHz)
±15 dB @ 3 kHz
±15 dB @ 500 Hz
±15 dB @ 80 Hz
75 Hz, 18 dB/Oct.
24-bit
24-bit
Reverbs: Hall, Room, Vocal, Plate
Delays: Mono, Stereo (max delay time: 650 ms)
Modulations: Chorus, Flanger, Reverb
Combinations: Reverb + Delay, Reverb + Chorus, Reverb + Flanger
16 presets, 16 variations each
16-position preset selector, 16-position variation selector, DSP mute switch,
peak LED indicator
Fader 0 dB, channels muted: -90 dBr (ref: +4 dBu)
Fader 0 dB, all input channels assigned & set to unity gain: -88 dBr (ref: +4 dBu)
+22 dBu balanced XLR
+22 dBu unbalanced 1/4"
-∞ to +15 dB
+22 dBu
UK/Australia: 240 VAC ~ 50 Hz
Europe: 210-240 VAC ~ 50 Hz
70 W
T1.6 AL
Standard IEC receptacle
30.1" x 15.7" x 4.5" (765 mm x 400 mm x 115 mm)
23.4 lbs (10.6 kg)
www.altoprofessional.com
MANUAL VERSION 1.0
.