・ Mount the image sensor unit (#B20521).
・ Tighten the three screws (#525) in numeric order ( ① → ② → ③ ).
・ Place the wires ([Brown][Orange]) under the image sensor unit.
③
Image sensor unit (#B20521)
・ Attach the harness(#5073).
・ Attach the tape [#TA-0005 ( 5×15 ) ] for arranging the wires ([Brown][Orange]).
Harness (#5073)
Image sensor unit (#B20521)
Direction for
positioning
②
Place the wires ([Brown][Orange]) under the image sensor unit.
Connector
- A95 ・ D700 -
①
Tape (#TA-0005)
INC
VBA22001-R.3754.A