Nikon D700 Repair Manual page 124

・Attach the spring (#273) and two springs (#276).
・ Mount the AF sensor unit (#B20294) by fitting the support pole of the AF sensor base plate (#B10277).
・ Put the two washers (#1657).
・ Tighten the two screws (#275) lightly in numeric order from ① to ② until the screw point touches the
ground, then make three turns counterclockwise.
Washer (#1657)
・ Put the washer (#274) on the support pole of the AF sensor base plate (#B10277).
・ Put the E-ring (#1653).
Spring (#276)
AF sensor unit (#B20294)
Support pole
AF sensor unit (#20294)
Washer (#274)
- A24 ･ D700 -
AF sensor base plate
(#B10277)
Spring (#273)
screw(#275)
②
INC
VBA22001-R.3754.A
①
HEX. KEY WRENCH (φ1.5mm)
Support pole
E ring (#1653)