Nikon D700 Repair Manual page 152

INC
VBA22001-R.3754.A
・ Pass the FPC edge of the shutter unit (#B12001) through the hole of the penta FPC unit (#B5005), then
solder at four places.
・Attach the tape [#TA-0005（10 × 20)].
Penta FPC unit (#B5005)
Shutter unit (#B12001)
Grip-supporting mold
TAPE #TA-0005（10 × 20）
・ Attach the sponge (#952) to the grip-supporting mold (#58).
・ Attach the grip-supporting mold (#58).
・ Tighten the screw (#1644).
Oil barrier:OS-30MEL
Sponge (#952)
Grip-supporting mold (#58)
Position for attachment
Screw (#1644)
Grip-supporting mold (#58)
Changed page (Overall revision)
- A52 ･ D700 -
October.02.2008