COMPRO TN30 User Manual page 38

Compro TN30/TN30W Network Camera
Image server
This page allows you define the naming rules of the snapshots taken by the camera and saved to the
server when an event is triggered.
SMS server
Here it provides the configuration for SMS notification feature that allows the camera to send a SMS (Short
Message Service) alert message to one or more pre-defined recipients when a pre-defined event scenario
is being triggered. This feature does not require additional hardware GPRS modem and SIM card installed.
Users only need to first apply an account with a third-party, web-based SMS gateway service provider. To
properly configure SMS server:
1. Under [Setup] > [Event Setup] > [Event Server Setup], click on [SMS server] to start configuration.
2. Provide the required data for the following field:
If you do not have a Clickatell account yet, please visit [www.clickatell.com], and click [SIGN UP]. Then
go ahead to sign up to the "Clickatell Central (API)" service and follow Clickatell's online instructions to
obtain an API ID.
3. Choose [Next] to save the setting.
4. Customize the SMS message content if wanted. Choose [Next].
5. To receive a test message, click on [Send me a SMS message to the SMS Gateway]. Or choose [Finish]
to save the configuration.
6. To enable SMS notification, go to [Setup] > [Event Setup], and click on [Trigger Setup] to create a new
event trigger or modify an existing one. Then under [Event Actions], check [Send SMS] and choose
[Finish]. Note that you must have enough credit at Clickatell in order to send SMS message.
6-8 Event Setup
Figure 6-10. Image server setup example
Field
Service provider Default: Clickatell
User name User name registered at Clickatell
API ID API ID provided by Clicktatell
Target country The country code for recipient's mobile phone
number
Target cell phone Recipient's mobile phone number. Enter only one
recipient number in each field.
Table 6-2. SMS server setting
Description