User Settings; Network Settings; Ethernet; Wireless - COMPRO TN30 User Manual

Compro TN30/TN30W Network Camera

User Settings

Here you can add, modify or remove viewers/administrators. The viewers are only allowed to view live video
and can't change any of the camera settings. On the flip side, the administrators have the rights to make any
changes.
• Modify/Remove - Click here to Modify or Remove an existing viewer.
• Add - Click here to add a new viewer or administrator
• Allow anonymous viewer login - Click here to allow anonymous viewer login without requiring user
name and password, but only to allow them to view the live video.
When you add a new user, you need to provide the information on user name, password and group type.

Network Settings

Here you can check your network settings and adjust the detailed settings.

Ethernet

Choose the IP address configuration. The camera can obtain IP address via DHCP (recommended), use the
manually inputted static IP address, or obtain IP address via PPPoE for which you need to provide valid user
name and password.

Wireless

If you are using the TN30W IP camera, you can set up the wireless connection in this page. To connect
wirelessly, please check the [Use Wireless First] box to give priority to wireless connection when LAN network
is also connected. And then provide the necessary information on IP address (to obtain IP address via DHCP
or use specified static IP address) and access point. And click [Save] to save the changes.
6-4 User Settings
Figure 6-6. Users Setting
Figure 6-7. Adding/Modifying user