COMPRO TN30 User Manual page 16

Compro TN30/TN30W Network Camera
4. Check the camera name, date and time
setting.
5. Choose whether to use C4Home service
to remotely access your camera. C4Home
is a platform for viewing, managing
and sharing network cameras over the
internet. You may also use a different
C4Home server by clicking on [Advanced
Settings]. (Default server is www.c4home.
com) (If C4Home service is enabled, iDDNS
service will not be available for use on the
camera.)
6. C h o o s e to h ave t h e c a m e ra o b t a i n
IP address automatically (DHCP) or
manually assign its IP address. Then set
the connection port and local power
line frequency settings (not available for
change when C4Home service is enabled)
3-6 Connect the Cables
Note:
C4Home video streams are encrypted end-to-end and most of the
streams are sent through direct channels and don't pass through
C4Home server, which helps protect user privacy.
Figure 3-6. Camera configuration
Figure 3-7. C4Home setup
Figure 3-8. Device configuration