COMPRO TN30 User Manual page 18

Compro TN30/TN30W Network Camera
10. (Skip here if you didn't enable C4Home
service.) You need to login to your C4Home
account. If you don't have a C4Home
account yet, choose to create a C4Home
account and continue with account
registration.
11. iWizard starts programming your camera
based on your settings. Please wait
patiently and DO NOT interrupt the
process. (If you didn't enable C4Home
service, you'll get to review your settings
before saving them.)
3-8 Connect the Cables
Note:
iDDNS is a free DDNS (Dynamic Domain Name Service) service offered by
Compro. iDDNS service is not be available for use when C4Home service is
enabled. If you are using floating IP address, you can use DDNS service to create a
hostname that links to your home or office IP address. Having created the iDDNS
address name, you can then enter `http://xxx (input by yourself ).iddns.org' into
your browser's address bar to remotely access your camera.
If your local LAN and router have firewall to block attack from outside, you have
to configure the HTTP port on your router. For example, if you set the HTTP port
"2001" for your IP camera, your IP camera's address will be http://xxx (entered by
you).iddns.org:2001.
Figure 3-12. C4Home account setup
Figure 3-13. Saving Changes