Table of Contents
Advertisement
7. (For TN30W wireless connection setup)
If you are using the TN30W, you can
choose to connect wirelessly by default.
The wizard will search for available access
points. Then select one access point to use.
8. (For TN30W wireless connection setup)
Enter the correct passphrase, and choose
the IP address configuration.
9. (Skip here if you have enabled C4Home
service) If you are using floating IP, you can
use DDNS service and create a hostname
that links to your camera's IP address. Click
[Yes] and input an address name. Then
click [Check Availability] button.
Figure 3-9. Wireless connection setup
Figure 3-10. Wireless connection setup
Figure 3-11. iDDNS configuration
Connect the Cables
Chapter 3: Installation
3-7
Hide quick links:
Advertisement
Table of Contents
