Table of Contents
Advertisement
Compro TN50 Network Camera
Hardware Overview
11
12
13
9
10
Figure 1-2. Front and rear view
LED status indicator – For indicating system status.
Lens – 2.0 mm, F2.8, fixed iris.
Speaker – Audio output.
Ethernet port – Connect to the Ethernet port of your network hub/switch that also connects to your
viewing PC.
Power connector – DC 5V/2A power supply.
USB wireless adapter port – Only for use with Compro wireless adapters.
MicroSD card slot – Insert the MicroSD/SDHC card for event recording and snapshot.
Microphone pinhole (on the bottom) – For receiving ambient sound.
Illumination LED – Illuminate when PIR sensor detect.
PIR Sensor – Passive Infrared sensor to detect invader.
Connection status indicator – Blinking yellow indicates network activity over the camera's Ethernet port.
Reset button – Press and hold the button to reset the camera back to factory defaults.
Network speed indicator – Constant green (100Mbps) or unlit (10Mbps).
2-2 Hardware Overview
Advertisement
Table of Contents
