Table of Contents
Advertisement
Compro TN50 Network Camera
Accessing via PC Web Browser
User can check the current condition of the monitored area via Internet Explorer which comes with all
Windows-based computer system. Please refer to the following steps to watch live view on WebVUer:
1. Open the Internet Explorer.
2. Enter the camera's IP address in the address bar. (e.g. 192.168.0.100). If you don't know the IP address of
your camera, use Compro iWizard to scan for your camera on your LAN network.
3. A dialog box that requests the user name and password appears; enter a valid user name and password,
and then press OK. The default user name and password are both `admin. '
4. After valid user name and password are entered, Internet Explorer will prompt the installation of camera
software from `Compro technology, Inc. '
5. Click on the warning message and choose to install the ActiveX.
6. And then the reconfirmation dialog box will come up. Please press [Install] to install the
`ComproClientActiveX.cab' on your system.
4-6 Instant Monitoring
Figure 4-5. Login dialog box
Note:
If you forget your user name and password, you need to reset your
camera back to factory default settings (see Troubleshooting chapter).
Figure 4-6. Installing Compro ActiveX
Note:
Compro ActiveX components only support 32-bit Internet Explorer.
Hence, if the viewing computer system is running 64-bit version of
Windows, the 32-bit version of Internet Explorer must still be used to
access the camera.
Advertisement
Table of Contents
