Manual Scan; System Info; Factory Reset - Teac HDB843 User Manual

Manual Scan

You can use this function when you know the ' channel number ' of the channel you want
to find. Press RIGHT/LEFT
channel number, the appropriate frequency value is also changed below. And you can see the
signal level and signal quality in the bottom.
Manual Scan
Channel
22
Frequency
482000
Bandwidth 8MHz
Scan
Stopped
:
TV Channels Audio Channels
Signal Level
Signal Quality
EXIT
RECALL
Press UP/DOWN keys to highlight the Scan item, then press
the scan. After scan is completed, you can see the channels newly searched and the first
channel will be displayed in the small window. If no new channels are found, a warning
message will appear.
Manual Scan
Channel
36
Frequency
585500
Bandwidth
7MHz
Scanning
Scan
Start
,
Start the scan please wait
:
TV Channels Audio Channels
Signal Level
Signal Quality
EXIT
RECALL

System Info

In System Info page you can check the information about the version of software and
.
hardware
Press key to go back the previous menu while
System Info
:
Hardware Version KhznTek-08-11-26
:
Manufactured by COMIVISION
:
Software Stack MAGNET_CORE
:
Software Version RELEASE-20090224-b90

Factory Reset

In the Factory Reset you can reset the unit back to 'First Time Installation'.
Note: Once you perform Factory Reset, all data such as Channel List, and User
Configured data will be cleared.
keys until the desired channel number is selected, when changing
:
.. .
:
OK EXIT
21
RIGHT/LEFT
Manual Scan
Channel
52
Frequency 722000
Bandwidth
8MHz
Scan
Stopped
:
TV Channels 4 Audio Channels 0
SZTVM01
SZTVM02
SZTVM03
Data
Signal Level
Signal Quality
EXIT
RECALL
EXIT key to quit.
Factory Reset
Factory Reset
All private settings and other
user data will be erased Do you
?
want to proceed
keys to start
:
.
OK EXIT