Installation; Auto Scan - Teac HDB843 User Manual

Installation

Press the MENU key on the remote control to enter the Main Menu, choose the
Installation option and press
control to select a submenu. Press the
the EXIT key to leave, and then the changes have been done will be stored. Here is some
information about submenu.
The Installation function let you to:
1

Auto Scan

2
Manual Scan
3
System Info
4
Factory Reset
How to select the functions listed above in the Installation function page:
1
Select 'Installation' in the 'Main Menu'.
2
Press the UP/DOWN
3
Press the OK key.
Auto Scan
If your receiver is connected to the aerial and TV, you can automatically scan channels
without entering any other information.
Before starting the scan, a box asking you to confirm what you want to do will appear.
Press the OK key, and the set-top box will begin to search through channel 6 in VHF to
channel 69 in UHF, and the TV and Radio channels it finds will be listed separately on the
page.
If you choose EXIT, you will go back to the Installation menu page.
Auto Scan
:
CH 35
Scan Progress
Warning
:
Scanned Channel 6 Scanning
,
In Auto Scan all the channels
:
TV Channels 4 Audio Channels 2
stored before and private
ABC HDTV ABC DIG Radio
ABC TV Melbou ABC DIG Jazz
settings will be cleared please
ABC2
.
confirm to start
ABC TV
Signal Level
Signal Quality
Note: In this function all channel information stored before such as favourite settings
will be removed.
OK key. Then you can press the
key you can return to the Main Menu, or press
keys until the item you want is highlighted.
586 MHz
:
,
OK EXIT
19
UP/DOWN keys on the remote
Auto Scan
:
CH 35
Scan Progress
:
Scanned Channel 6 Scanning
:
TV Channels 4 Audio Channels 2
ABC HDTV ABC DIG Radio
ABC TV Melbou ABC DIG Jazz
ABC2
ABC TV
Signal Level
Signal Quality
586 MHz
: