Mounting; Orientation; Rigging; Procedure - Chauvet Ovation E-260WW User Manual

Setup

Mounting

Orientation

Rigging

Procedure

Mounting Diagram
-8-
Before mounting this product, read and follow the
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Chauvet recommends using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications
product.
·
When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
The Ovation E-260WW comes with a hanging/mounting bracket to which you can attach
mounting clamps. The bracket has 13-mm holes, which are appropriate for this purpose. You
must supply your own mounting clamps, so be sure the clamps are capable of supporting the
weight of this product. Use at least one mounting point per product where necessary..
Bracket
Adjustment
Hand Shank
Secure the safety
passageway on the
top of the product
Overhead Mounting
for the weight-bearing requirements of this
Mounting Clamp
Hanging/Mounting
Bracket
Safety Cable
cable using the
Safety Notes. For our CHAUVET
Alternative Yoke
Alternate Short Mounting
Ovation E-260WW User Manual Rev. 1
Attachment