Dmx Linking; Dmx Personalities; Remote Device Management (Rdm); Master/Slave Connectivity - Chauvet Ovation E-260WW User Manual

Hide thumbs Also See for Ovation E-260WW:
Table of Contents

Advertisement

DMX Linking

DMX
Personalities
Remote Device
Management
(RDM)
Master/Slave
Connectivity
Ovation E-260WW User Manual Rev. 1
You can link the Ovation E-260WW to a DMX controller using a 3- or 5-pin DMX connection. If
using other DMX-compatible products with the Ovation E-260WW, you can control each
individually with a single DMX controller.
The Ovation E-260WW uses the standard DMX data connection for the 1-, 2-, 3- and 6- channel
DMX modes.
·
Refer to the
Introduction
·
Refer to the
Operation
these personalities.
·
The
DMX Values
section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to
communicate bi-directionally along existing DMX cabling. Check the DMX controller's User
Manual or with the manufacturer as not all DMX controllers have this capability. The
Ovation E-260WW supports RDM protocol that allows feedback to make changes to
menu map options.
The Master/Slave mode allows a single Ovation E-260WW (the "master") to control the actions
of one or more Ovation E-260WW products (the "slaves") without the need of a DMX controller
to control the slaves. Once set and connected, the slaves will operate in unison with the master.
For instructions on connecting and configuring this product, see
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
·
The
Operation
section of this manual provides detailed instructions on how to
configure the master and slaves.
·
If you are not familiar with or need more information about DMX standards, or the
DMX cables needed to link this product to a DMX controller, download the DMX
Primer from the Chauvet website: www.chauvetprofessional.com.
chapter for a brief description of each DMX personality.
chapter to learn how to configure the Ovation E-260WW to work in
Master/Slave
Mode.
Setup
-7-

Advertisement

Table of Contents
loading

Table of Contents