Chrysler laser 1990 Technical Information Manual page 4

The abbreviations are used in this manual for classification of model types.
following
Indicates the manual transaxle, or models equipped 'with the manual transaxle.
Indicates the multi-point injection, or engines equipped with the multi-point injection.
Indicates an engine with the double overhead camshaft, or a model equipped with such an engine,
Indicates an engine with turbocharger, or a model equipped with such an engine.
Turbo:
Non-Turbo: Indicates an engine without turbocharger, or a model equipped with such an engine.
HOW TO READ A CIRCUIT DIAGRAM
Circuit diagrams are prepared as follows using these
symbols:
The current flow at the i nition
key positions "ACC" " N" and
"ST" is shown combined.
Be sure to trace the appropriate
circuit depending on the ignition
key position.
supply connection.
Connectors
This symbol indicates connector
for equipment (male connector is..
used as an intermediate connec-
tor) viewed from in front of the
Connector for equip-
ment with attached har-
ness
NOTE
For specific details concerning the interpretation of
circuit diagrams, refer to the separately bound
Service Manual.
I
Connector inserted
These symbols show the input to
and output from (direction of
current flow to and from) an
electronic control unit.
Input
and
Input Output output
Arrow indicates direction of