Table of Contents
Advertisement
A large-size integral soft fascia is installed both for
the front and rear bumpers, which prevents perma-
nent deformation in light collision.
The bumpers feature the highly rigid bumper rein-
Front bumper
Section A-A
Front turn
Front bumper
reinforcement
BODY - Power Windows / Bumpers
Batterv
bumper
absorber
1. After the delay time (0.7 second) has claps,+,,,
the voltage (comparison voltage) at the negative
ence voltage at the positive (+) side, with the
result that the output voltage of ICI becomes
low, and the transistor (Tr) is switched OFF.
2. As a result of the transistor (Tr) being switched
OFF, current stops flowing to the coil (L), and
thus there is no longer the force to hold the
plunger.
3. As a result, the switch is returned to the neutral
status by the return spring, and the motor
operation stops.
forcement, shock absorber, and highly rigid b --
frame, all of which contributes to the reduL. a
protrusion, yet ensuring 5-mph bumper perform-
ance for the enhanced safety.
Rear bumpe:
Advertisement
Chapters
Table of Contents
