Viewing A List Of Attached Devices; Configuration File Management - NETGEAR WPNT834 Reference Manual

Reference Manual for the RangeMax 240 Wireless Router WPNT834

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 6-4
For each device, the table shows the IP address, NetBIOS Host Name or Device Name (if
available), and Ethernet MAC address. To force the router to look for attached devices, click the
Refresh button.
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.

Configuration File Management

The configuration settings of the WPNT834 router are stored within the router in a configuration
file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the user's PC, or
cleared to factory default settings.
Maintenance 6-5
v1.0, November 2005