How To Log On To The Wireless Router After Configuration Settings Have Been Applied - NETGEAR WPNT834 Reference Manual

Reference Manual for the RangeMax 240 Wireless Router WPNT834
How to Log On to the Wireless Router After
Configuration Settings Have Been Applied
1. Connect to the wireless router by typing
browser, then click Enter.
Figure 3-3
2. For security reasons, the router has its own user name and password. When prompted, enter
admin for the router user name and
letters. To change the password, see
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
Figure 3-4
Once you have entered your user name and password, your Web browser should find the
WPNT834 router and display the home page as shown in
Note: If the Check for New Version Upon Log-in checkbox is checked, the home
page will be the Router Upgrade page. Otherwise, it will be the Basic Settings
page.
3-6
http://www.routerlogin.net
password for the router password, both in lower case
"Changing the Administrator Password" on page
v1.0, November 2005
in the address field of your
Figure 3-5 below.
Connecting the Router to the Internet
6-9.