The Router's Front Panel - NETGEAR WPNT834 Reference Manual

The Router's Front Panel

The front panel of the WPNT834 router contains the status lights described below.
1 2
Figure 2-1
You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Item Function Activity
1 Power On Green Solid
Off
2 Test On
Off
3 Wireless On
Off
4 Internet On
Blink
5 LAN On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
Introduction
Reference Manual for the RangeMax 240 Wireless Router WPNT834
3 4
Description
Power is supplied and the router has passed its diagnostic test.
Power is not supplied to the router.
The unit is performing the power on self test diagnostic.
The unit successfully completed the power on self test diagnostic.
The Wireless port is initialized and the wireless feature is enabled.
The wireless feature is turned off or there is a problem.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
The LAN (local area network) port has detected a link with a 100
Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected a link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
v1.0, November 2005
5
2-7