Erasing The Configuration - NETGEAR WPNT834 Reference Manual

Reference Manual for the RangeMax 240 Wireless Router WPNT834
From the main menu of the browser interface, under the Maintenance heading, select the Backup
Settings heading to bring up the menu shown below.
Figure 6-5
Three options are available, and are described in the following sections.
Backing Up and Restoring the Configuration
The Restore and Backup options in the Settings Backup menu allow you to save and retrieve a file
containing your router's configuration settings.
To save your settings, click the Back Up button. Your browser will extract the configuration file
from the router and will prompt you for a location on your computer to store the file. You can give
the file a meaningful name at this time, such as pacbell.cfg.
To restore your settings from a saved configuration file, enter the full path to the file on your
computer or click the Browse button to browse to the file. When you have located it, click the
Restore button to send the file to the router. The router will then reboot automatically.
Warning: Do not interrupt the reboot process.

Erasing the Configuration

It is sometimes desirable to restore the router to the original default settings. This can be done
using the Erase function, which restores all factory settings. After an erase, the router's username
is admin, the password is password, the LAN IP address is192.168.1.1, and the router's DHCP
server is enabled.
6-6 Maintenance
v1.0, November 2005