Statistics - NETGEAR WG302 Reference Manual

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Table 4-1. General Information Fields
Field
Country/Region
Firmware Version
Access Point Mode
Current IP Settings
IP Address
Subnet Mask
Default Gateway
DHCP Client
Current Wireless Settings
Operating Mode
Wireless Network Name (SSID)
Channel/Frequency
WEP/WPA

Statistics

The Information - Statistics screen provides various LAN and WLAN statistics.
Management
Description
Displays the domain or region for which the wireless access point is
licensed for use. It may not be legal to operate this wireless access
point in a region other than one of those identified in this field.
The version of the firmware currently installed.
Identifies the operating mode of the WG302: Access Point,
Point-to-point bridge, Multi-point bridge or Repeater.
The IP address of the wireless access point.
The subnet mask for the wireless access point.
The default gateway for the wireless access point communication.
Enabled indicates that the current IP address was obtained from a
DHCP server on your network. Disabled indicated a static IP
configuration.
Identifies the 802.11 operating mode of the WG302.
Displays the wireless network name (SSID) being used by the
wireless port of the wireless access point. The default is NETGEAR.
Identifies the channel the wireless port is using. 11 is the default
channel setting. See "Wireless Channels" on page B-7
frequencies used on each channel.
WEP/WPA setting.
September 2004
for the
4-5