Advanced Configuration; Understanding Advanced Ip Settings For Wireless Clients - NETGEAR WG302 Reference Manual

This chapter describes how to configure the advanced features of your NETGEAR ProSafe
Wireless Access Point 802.11g WG302 :
• IP Settings: Use the AP as a DHCP server for wireless clients.
• Wireless Settings: Set up AutoCell and configure advanced wireless LAN parameters.
• Access Point Settings: Enable wireless bridging and repeating.
These features can be found under the Advanced heading in the main menu.

Understanding Advanced IP Settings for Wireless Clients

The default advanced IP wireless settings usually work well. If you want the AP to act as a DHCP
server gateway for wireless clients, use this feature. The AP can accept both static and DHCP
clients.
Figure 5-1: Advanced IP Settings for Wireless Clients screen

Advanced Configuration

Advanced Configuration
September 2004
Chapter 5
5-1