Configuring The Vpn Tunnel - NETGEAR FVG318 Reference Manual

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual

Configuring the VPN Tunnel

This scenario assumes all ports are open on the FVG318.
Figure C-6
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVG318 labeled Gateway A
Log in at the default address of http://192.168.0.1 with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of http://10.5.6.1 at Gateway A
2. Use the VPN Wizard to configure the FVG318 at Gateway A.:
• Connection Name: Scenario_1 (in this example)
• Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel
endpoints
• Connection Type: A Remote VPN Client
3. Set up the VPN Client at Gateway B.
a. Right-mouse-click the ProSafe icon (
Editor. If you need to install the NETGEAR ProSafe VPN Client on your PC, consult the
documentation that came with your software.
C-14
) in the system tray and select the Security Policy
VPN Configuration of NETGEAR FVG318
v1.0, September 2007