Manually Configuring Your Internet Connection - NETGEAR FVG318 Reference Manual

Prosafe 802.11g wireless vpn firewall
Hide thumbs Also See for FVG318:
Table of Contents

Advertisement

Note: When you enable remote management, we strongly advise that you change
your password. See
the procedure on how to do this.

Manually Configuring your Internet Connection

Unless your ISP assigns your configuration automatically via DHCP, you will need the
configuration parameters from your ISP. For example, if your router detected a PPPoE or PPPoA
service, you must provide a Login sequence in order to obtain an Internet connection from your
ISP. If your ISP requires a Static IP address, then you must provide the fixed addresses for Static
IP. The types of data you will need are highlighted in
explained in more detail below.
The information required by each of the connection types is described in the following table.
Table 2-1. Internet Service Connections
Connection Method
PPPoE
PPPoA
DHCP (Dynamic IP)
Static (Fixed) IP
IPoA
To configure your Internet connection:
1. Enter your ISP Login information. Select the Does Your Internet Connection require a
Login? option based on the type of account your have with your ISP. If you need to enter login
information every time you connect to the Internet, select Yes. Otherwise, select No.
If your connection is PPTP or PPPoE, then you need to login. Choose Yes and enter:
Login. This is often the name that you use in your e-mail address (for example, if your
main mail account is jdoe@aol.com, enter jdoe).
Note: Some ISPs (for example, Earthlink) require that you use your full e-mail
Connecting the Firewall to the Internet
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
"Changing the Administrator Password" on page 7-6
Data Required
Login (Username, Password).
Login (Username, Password).
No data is required.
Internet IP address, Subnet Mask and Gateway IP Address supplied by
your ISP; and the Router's DNS Address (also supplied by your ISP).
Internet IP Address and Subnet Mask; Gateway IP Address
address when you log in.
v1.0, September 2007
Table 2-1
by connection method, and
for
2-7

Advertisement

Table of Contents
loading

Table of Contents