Introduction; Key Features Of The Vpn Firewall Router - NETGEAR FVG318 Reference Manual

This chapter describes the features of the NETGEAR® ProSafe 802.11g Wireless VPN Firewall,
Model FVG318.

Key Features of the VPN Firewall Router

The ProSafe 802.11g Wireless VPN Firewall with eight-port switch connects your local area
network (LAN) to the Internet through an external access device such as a cable modem or DSL
modem and provides 802.11b/g wireless LAN connectivity.
The FVG318 is a complete security solution that protects your network from attacks and
intrusions. Unlike simple Internet sharing firewalls that rely on Network Address Translation
(NAT) for security, the FVG318 uses stateful packet inspection for Denial of Service attack (DoS)
protection and intrusion detection. The FVG318 allows Internet access for up to 253 users. The
VPN firewall provides you with multiple Web content filtering options, plus browsing activity
reporting and instant alerts—both via e-mail. Parents and network administrators can establish
restricted access policies based on time-of-day, Web site addresses and address keywords, and
share high-speed cable/DSL Internet access for up to 253 personal computers. In addition to NAT,
the built-in firewall protects you from hackers.
With minimum setup, you can install and use the firewall within minutes.
The VPN firewall provides the following features:
• 802.11g and 802.11b standards-based wireless networking.
• Wireless Multimedia (WMM) support.
• Easy, Web-based setup for installation and management.
• Front panel LEDs for easy monitoring of status and activity.
• Content filtering and site blocking security.
• Built-in eight-port 10/100 Mbps switch.
• Ethernet connection to a WAN device, such as a cable modem or DSL modem.
• Extensive protocol support.
• Flash memory for firmware upgrade.
v1.0, September 2007
Chapter 1

Introduction

1-1