Configuring Wpa With Radius - NETGEAR FVG318 Reference Manual

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
• Manual Entry Mode: Enter ten hexadecimal digits (any combination of 0-9, a-f, or
A-F). These hex values are not case sensitive. Select which of the four keys will be
used and enter the matching WEP key information for your network in the selected
key box.
– For 64 bit WEP: Enter ten hexadecimal digits (any combination of 0-9, A-F).
– For 128 bit WEP: Enter twenty-six hexadecimal digits (any combination of 0-9, A-
F).
Please refer to "Wireless
explanation of each of these options, as defined by the IEEE 802.11b wireless communication
standard.
5. Click Apply to save your settings.

Configuring WPA with RADIUS

Note: Not all wireless adapters support WPA. Furthermore, client software is required on
the client. Windows XP and Windows 2000 with Service Pack 3 do include the
client software that supports WPA. Nevertheless, the wireless adapter hardware
and driver must also support WPA. Consult the product document for your wireless
adapter and WPA client software for instructions on configuring WPA settings.
To configure WPA with RADIUS:
1. Log in at the default LAN address of http://192.168.0.1 with the default user name of admin
and default password of password, or using whatever LAN address and password you have
set up.
2. Select Network Administration > Wireless Settings. The Wireless Settings Screen will display.
3-12
Communications" in Appendix B, "Related
v1.0, September 2007
Documents" for a full
Configuring Wireless Connectivity