Getting E-Mail Notifications Of Firewall Logs - NETGEAR FVG318 Reference Manual

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
.
Figure 4-9
To block keywords or Internet domains based on a schedule:
1. Select Security > Schedule from the menu. The Schedule 1 screen will display.
2. In the Scheduled Days section, select the All Days or Specific Days radio box. If you want to
limit access completely for the selected days, select All Day. Otherwise, select the specific
days that you want to limit access.
3. If you want to limit access during certain times for the selected days, select the All Day or
Specific Times radio box in the Schedule TIme of Day section. If you selected Specific
Times, then enter a Start Time and an End Time.
4. Click Apply to save your changes.
5. Configure Schedule 2 and Schedule 3, if required, following the previous steps.

Getting E-Mail Notifications of Firewall Logs

The VPN firewall can be configured to log and e-mail denial of service attacks, general attack
information, login attempts, dropped packets, and so forth, to a specified e-mail address or a
SysLog server.
In order to receive logs by e-mail, you must provide your e-mail information in the Enable E-Mail
Logs section of the Firewall Logs & E-mail screen.
To receive firewall logs via email:
1. Select Monitoring > Firewall Logs & E-Mail. The FIrewall Logs & E-mail screen will display.
4-14 Firewall Protection and Content Filtering
v1.0, September 2007