Configuring The Vpn Tunnel - NETGEAR FVG318 Reference Manual

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Table C-1. Policy Summary
Security Scheme:
IP Addressing:
NETGEAR-Gateway A
NETGEAR-Gateway B

Configuring the VPN Tunnel

This scenario assumes all ports are open on the FVG318.
FVG318
Figure C-3
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVG318 labeled Gateway A.
Log in at the default address of http://192.168.0.1 with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of http://10.5.6.1 at Gateway A.
2. Use the VPN Wizard to configure the FVG318 at Gateway A.
• Connection Name: Scenario_1 (in this example)
• Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel
endpoints
• Remote WAN IP address: 22.23.24.25 (in this example), must be unique at each VPN
tunnel endpoint
• Remote LAN IP Subnet
– IP Address: 172.23.9.1 (in this example), must be unique at each VPN tunnel endpoint
C-4
IKE with Preshared Secret/Key
Static IP address
Static IP address
v1.0, September 2007
FVG318
VPN Configuration of NETGEAR FVG318