Avaya BCM50 Hardware Installation Manual page 53

Hide thumbs Also See for BCM50:

Table of Contents

1. Once the hard drive is correctly installed, as described in the Hard disk

section of this guide, connect a PC to the OAM port of the BCM and

power up the BCM. If you experience problems in connecting to the

BCM when configured to obtain an IP address automatically via DHCP,

configure your PC with the following IP settings:

 IP Address = 10.10.11.2

 Subnet Mask = 255.255.255.252

2. When the BCM is ready to accept a SSH client connection, the Power

LED will be full green, and the Status LED will be blinking orange.

Open up a SSH client such as PuTTY, and connect to the default OAM

port address 10.10.11.1

3. Login to the BCM using the default details:

 User = nnadmin

 Password = PlsChgMe!

NN40011-002 Issue 1.2 BCM50 Rls 6.0

BCM50 Hardware & Installation

Table of Contents